Onboard Your Phone With Activation Code - Cisco 8832 User Manual

Your Phone
Note
Figure 2: PoE Deployment
Figure 3: Non-PoE Deployment

Onboard Your Phone with Activation Code

After your phone boots up, you will see a welcome screen where you can enter the activation code. If you
don't have an activation code, contact your administrator.
Before you begin
Your administrator provides you with a 16-digit activation code in the form xxxx-xxxx-xxxx-xxxx.
Procedure
Step 1
Enter your activation code in the field that is provided on the Welcome screen. You don't need to input the
hyphen (-) character when entering the code.
Step 2
Press Continue.
• Non-PoE deployment: Connect the phone to the Cisco IP Conference Phone 8832 Non-PoE
Ethernet Injector (CP-8832-ETH or CP-8832-ETH-WW). Then, connect the injector to the network
with an Ethernet cable and plug the injector into the electric outlet.
CP-8832-ETH and CP-8832-PWR are for North America. CP-8832-ETH-WW and CP-8832-PWR-WW
are for other locations.
Cisco IP Conference Phone 8832 Multiplatform Phone User Guide
Onboard Your Phone with Activation Code
9