Phone Setup; Ways To Provide Power To Your Conference Phone; Connect To The Network; Onboard Your Phone With Activation Code - Cisco IP Conference Phone 8832 User Manual

Your Phone

Phone Setup

Typically, your administrator sets up your phone and connects it to the network. If your phone is not set up
and connected, contact your administrator for instructions.

Ways to Provide Power to Your Conference Phone

Your conference phone needs power from one of these sources:
• Power over Ethernet (PoE)
Figure 2: Conference Phone PoE Power Options
Cisco IP Conference Phone 8832 PoE Injector
with the PoE power option

Connect to the Network

You need to connect the phone to the telephone network.
• Wired connection—The phone is plugged into the network using an Ethernet cable.

Onboard Your Phone with Activation Code

After your phone boots up, you will see a welcome screen where you can enter the activation code. If you
don't have an activation code, contact your administrator.
• North America
• Cisco IP Conference Phone 8832 PoE Injector
• Cisco IP Conference Phone 8832 Ethernet Injector
• Outside of North America—Cisco IP Conference Phone 8832 PoE Injector
Cisco IP Conference Phone 8832 Ethernet Injector with
the PoE power option
Cisco IP Conference Phone 8832 Multiplatform Phone User Guide
Phone Setup
3