Table of Contents
Advertisement
Mounting the TLP Pro 1225TG, 1525TG, and 1725TG
Removing the Rear and Base Covers
Some of these procedures require the rear and base covers to be removed. You must remove
the rear cover before you can remove the base cover.
1 1 1
Figure 29.
1.
2.
Desktop Mounting
The TLP Pro 1225TG, 1525TG and 1725TG come assembled with stands that allow the units to
be placed on any suitable flat surface (for example a desk, table, or lectern).
Placement without a Mounting Kit
Figure 30 shows the base of the TLP Pro 1225TG, with the cover removed to indicate the
position of the mounting holes. The base of the TLP Pro 1525TG and 1725TG are similar and the
spacing of the mounting holes (figure 30,
Figure 30.
2 2 2
Remove the Rear and Base Covers
Use the provided Extron removal tool. There is one notch on each side of the rear cover
(figure 29,
1
). Insert the tool into the notch to release the catch.
Use the removal tool to remove the base cover. There are two notches at the back of the
base (
2
).
TLP Pro 1225TG Base, Showing Mounting Holes
1 1 1
2 2 2
1
) is identical.
TLP Pro 1225, 1525, and 1725 Series • Mounting
1 1 1
31
Advertisement
Table of Contents
