Setup Menu - Extron electronics TouchLink Pro Series User Manual

Setup Menu

The TLP Pro 1225, 1525, and 1725 series touchpanels can be set up by using the on-screen
setup menu. This section provides information about accessing the
sub-menus:
Setup Menu
To open the setup menu, press the recessed
can be found on the rear panel:
•
•
•
The menus open at the
the top of the screen. These open the following screens:
•
•
•
•
•
•
The button for the selected screen is yellow; the buttons for the remaining screens are black.
There is also a red
the menu screens.
In this section, the figures show the screens for the TLP Pro 1225MG. The screens for the other
touchpanels are very similar.
MG models — see figure 4,
figure 5,
TG models — see
The MG models also have a
when the touchpanel is mounted in a wall (see
Status screen. There are six different buttons in the navigation panel at
Status Screen (see page 15)
Network Screen (see page 15)
Display Screen (see page 17)
Audio Screen (see page 18)
Input Screen (see page 18)
Advanced Screen (see page 20)
Exit button in the top right corner of the screen. Pressing this button closes
Menu button, using a small screwdriver. The button
, on page 8.
D
H , on page 9.
Menu button on the front panel as the rear panel is inaccessible
figure 2,
F
TLP Pro 1225, 1525, and 1725 Series • Setup Menu
Setup Menu and the six
, on page 6).
14