Table of Contents
Advertisement
1.
Select the video input by pressing the appropriate button (
The EDID information is shown in a read-only panel.
2.
To adjust
small window opens to the right of the screen. For
the window shows the current value with right and left arrows to increment or decrement the
value. To change the value more quickly, use the slider underneath.
To reset the value to default, press the
Contrast , and Detail is 64 . All three parameters can be adjusted to any value between 1
127 .
and
3.
Press
setting is
4.
Press
Advanced Screen
Status
Touchpanel Name:
Controller Name:
Controller IP:
------------------------------
Global Configurator Project
Name:
Version:
Creation Date:
Revision Date:
On
Figure 18.
System and GUI Project panels are read only, providing information about the system.
The
Menu PIN
Change to open the PIN Setup window. The PIN setup options allow you to enable,
Press
disable, or change the setup menu PIN. The PIN is a 4-digit number. Each digit can have any
value from
1.
Press a number on the keypad. A blue circle appears in the first box.
Figure 19.
2.
Select the other three digits for the PINs. The fourth circle appears momentarily and then the
screen changes to
3.
Enter the PIN a second time. When the PIN entered on the second occasion matches the
PIN entered on the first occasion, the PIN is set and the dialog closes.
Brightness , Contrast , Detail , or Overscan , press the appropriate button. A
Overscan . A small window opens offering the options 0% , 2.5% , and 5% . The default
5% .
Exit to save the changes and return to the Input screen.
Network
Display
Audio
System
TLPPro1225_ABCDEF
Name:
IPCPPro350_FEDCBA
Resolution:
192.168.254.250
Creation Date:
Revision Date:
Version:
N_Campus.gcpro
0.0.22.0
Project Size:
6/22/2020 2:15:26 PM
Storage Size:
6/25/2020 1:47:18 PM
Project Usage:
Menu Pin
Off
Change
Advanced Screen
0 through 9 .
Enter New Menu PIN
Back
1
2
3
4
5
6
7
8
9
0
Cancel
Numeric Keypad for Setting PIN
Confirm New Menu Pin .
TLP Pro 1225, 1525, and 1725 Series • Setup Menu
HDMI or XTP ).
Brightness , Contrast , and Detail ,
Default button. The default value for Brightness ,
Input
Advanced
Exit
GUI Project
N_Campus.gdl
1280x800
6/26/2020 11:31:55 AM
6/27/2020 12:06:31 PM
0.0.9
3 MB
196 MB
2%
20
Advertisement
Table of Contents
