Audio Screen; Input Screen - Extron electronics TouchLink Pro Series User Manual

Audio Screen

Status
Master
100
50
0
Figure 14.
Audio screen, use the slider controls to adjust the Master , Click , Sound , HDMI , and
On the
XTP volume settings.
• The Master panel allows you to click on the appropriate icon to set whether the audio is
heard through the speakers, headphones, or both.
It also sets the maximum volume threshold for all the other sound volume settings. For
example, if the master volume is set to
is set to
• Click sets the volume for audible feedback that accompanies events such as a screen
button being pressed.
• Sound sets the volume of audio from any audio file playback.
• HDMI sets the volume of the HDMI input.
• XTP sets the volume of the XTP input.
Click on the speaker and headphones icon at the bottom of each panel to toggle between audio
on (black button) and audio mute (yellow button). The

Input Screen

Status
Native Display:
HDMI
XTP
HDMI
XTP
Figure 15.
Input screen provides information about the video input signal status and allows
The
configuration of the input signal.
At the top of the screen the native display EDID information is shown. Figure 15 shows this is
1280x800 @ 50 Hz, HDMI, LPCM-2Ch . for the TLP Pro 1225MG.
Network Display Audio
Click Sound
100 100
50 50
0 0
Audio Screen
50 , it is equivalent to only 40 percent of maximum (50 percent of 80 percent).
Network Display Audio
1280x800 @ 50 Hz, HDMI, LPCM-2Ch, Extron
Input Status
Signal: 1920x1080 @ 59.94
EDID: 1280x800 @ 50 Hz
Signal: 1280x720 @ 60
EDID: 1280x800 @ 50 Hz
Input Configuration
Aspect HDCP
Ratio Authorize
Fill On
On
Fill
Input Screen
TLP Pro 1225, 1525, and 1725 Series • Setup Menu
Input Advanced Exit
HDMI XTP
100 100
50 50
0 0
80 (80 percent of maximum), when the HDMI volume
Sound audio is muted in figure 14.
Input Advanced Exit
HDMI LPCM-2-Ch
HDCP
HDMI HDMI, LPCM-2Ch
HDMI LPCM-2-Ch
HDCP
HDMI HDMI, LPCM-2Ch
EDID Image
Minder Settings
Edid Adjust
Edid Adjust
18