Positioning The Connecting Cable - Fein KBE 35 (A) Repair Instructions

Metal Core Drilling
Fitting

9.3.8 Positioning the connecting cable

Steps that must be completed:
- Fitting the gearbox parts
- Positioning the shaft
- Fitting the motor housing
- Fitting the armature
- Fitting the intermediate gear box
- Positioning the intermediate gear box
- Positioning the motor housing
- Positioning the carbon brushes
- Positioning the drill motor
Tool(s):
- Torx T15
1
2
3
4
C-SC_CSSM
1.
2.
3.
6
4.
5.
5
6.
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Position the circlip (1).
Connect the two strands (2) as shown in the connection
diagram.
Position the cover (3).
Screw in the two screws (4) [1.6 Nm
Position the cable clamping piece (5).
Screw in the screw (6) [1.6 Nm
01.04.2019
±0.25 Nm ].
±0.25 Nm
].
Page 71 of 75