Metal Core Drilling
Removal
8.3.3 Removing the gearbox parts
Steps that must be completed:
-
Removing the connecting cable
-
Removing the drill motor
-
Removing the motor housing
-
Removing the gearbox parts
-
Removing the shaft
Tool(s):
-
Circlip pliers
-
Arbor press
-
Sleeve
10 mm inner diameter; 34 mm outer diameter
-
Drawing-off socket cap
-
Clamping sleeve, 22 mm diameter
1
2
C-SC_CSSM
1.
2.
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Remove the circlip (1).
Press out the grooved ball bearing (2).
01.04.2019
Page 26 of 75