Positioning The Drill Motor - Fein KBE 35 (A) Repair Instructions

Metal Core Drilling
Fitting

9.3.7 Positioning the drill motor

Steps that must be completed:
- Fitting the gearbox parts
- Positioning the shaft
- Fitting the motor housing
- Fitting the armature
- Fitting the intermediate gear box
- Positioning the intermediate gear box
- Positioning the motor housing
- Positioning the carbon brushes
Tool(s):
- Socket head wrench, 6 mm
- Slotted screwdriver
1
2
C-SC_CSSM
1.
Crushing hazard around the drill motor
Crushing can occur.
Move the drill motor down using the spider, before the screw
(2) is unscrewed.
2.
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Place the pressure piece (1) in the correct position.
C !
AUTION
Slide the drill motor (2) into the guide.
01.04.2019 Page 69 of 75