Extension Cable - Fein Slugger HoleMaker III Instruction Manual

The risk from inhaling dusts depends on
how often these materials are worked.
Materials containing asbestos may only be
worked on by specialists.
Wood and light-metal dust
CAUTION
can cause spontaneous com-
bustion or explosions.
Hot mixtures of sanding dust and paint/var-
nish residuals or other chemical materials in
the filter bag or the vac filter can self-ignite
under unfavourable conditions, such as
sparking from sanding metal, continuous
sunlight or high ambient temperatures. To
prevent this:
Emission values for sound (Two-figure – specifications as per ISO 4871)
Sound emission
A-weighted emission pressure power level
measured at the workplace
in decibels
Measuring uncertainty
Measured A-weighted sound power level
L
(re 1 pW), in decibels
wA
Measuring uncertainty
C-weighted peak sound pressure level mea-
sured at the workplace
Measuring uncertainty
Mean vibrational value (core drilling)
2
– m/s
2
– ft/s
Measuring uncertainty
2
– m/s
2
– ft/s
REMARK: The sum of the measured emission value and respective measuring inaccuracy
represents the upper limit of the values that can occur during measuring.
Wear hearing protection!
Measured values determined in accordance with the corresponding product standard.

Extension cable.

If the use of an extension
WARNING
cord is required, its length
and conductor cross-section must be ade-
quate for the application in order to prevent
a voltage drop in the extension cord, power
loss and overheating of the power tool. Oth-
L
(re 20 μPa),
pA
K
, in decibels
pA
K
, in decibels
wA
L
, in decibels
pCpeak
K
, in decibels
pCpeak
K
, in
– Avoid overheating the material being
sanded and the power tool.
– Empty the dust collector/container rou-
tinely.
– Observe the material manufacturer's
working instructions.
– Observe the relevant regulations for the
materials being worked.
JME HoleMaker III (**) JME USA 202 M (**)
87.7
98.6
102.3
< 2.5
erwise, the extension cable and power tool
are prone to electrical danger, and the
working efficiency is decreased.
en
5
5
5
8.3
1.5
4.9
7
92.8
3
103.8
3
106.9
3
< 2.5
8.3
1.5
4.9