Metal Core Drilling
Fitting
9.1.9 Positioning the electronics
Steps that must be completed:
-
Fitting the electronics
Tool(s):
-
Torx T15, T20
4
2
1
6
5
7
8
C-SC_CSSM
3
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
1.
Position the cover (1) with the electronics.
2.
Position the power cable (2).
3.
Position the cable clamping piece (3).
4.
Screw in the screw (4) [0.9 Nm
5.
Connect the cable (5) as shown in the connection
diagram.
6.
Connect the cable (6) as shown in the connection
diagram.
7.
Screw in the screw (7) [1.5 Nm
8.
Screw in the screw (8) [1.8 Nm
±0.1 Nm
].
±0.2 Nm
].
±0.1 Nm
].
01.04.2019
Page 52 of 75