Removing The Intermediate Gear Box - Fein KBE 35 (A) Repair Instructions

Metal Core Drilling
Removal

8.2.6 Removing the intermediate gear box

Steps that must be completed:
- Removing the connecting cable
- Removing the drill motor
- Removing the carbon brushes
- Removing the drill motor
- Removing the intermediate gear box
Tool(s):
- Sleeve
60 mm inner diameter
85 mm outer diameter
- Punch, dia. 7 mm
- Socket wrench
- Socket wrench insert, 7 mm
- Slide hammer
- Inner puller
1
2
C-SC_CSSM
1.
2.
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Press out the armature (1).
Remove the sealing ring (2).
01.04.2019 Page 19 of 75