Removing The Armature - Fein KBE 35 (A) Repair Instructions

Metal Core Drilling
Removal

8.2.7 Removing the armature

Steps that must be completed:
- Removing the connecting cable
- Removing the drill motor
- Removing the carbon brushes
- Removing the drill motor
- Removing the intermediate gear box
- Removing the intermediate gear box
Tool(s):
- Drawing-off socket cap
- Chuck cone, 26 mm; 19 mm
1
C-SC_CSSM
1.
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Remove the grooved ball bearing (1).
01.04.2019 Page 21 of 75