Metal Core Drilling
Fitting
9.1.11 Positioning the control panel
Steps that must be completed:
-
Fitting the electronics
-
Positioning the electronics
-
Fitting the control panel
Tool(s):
-
Torx T20
1
4
6
2
7
C-SC_CSSM
1.
2.
3
3.
4.
5.
5
6.
7.
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Connect all connectors (1) as shown in the connection
diagram.
Position the cover (2).
Position the holder (3).
Screw in the screw [4x48] (4) [2.0 Nm
Screw in the screw [4x35] (5) [2.0 Nm
Screw in the two screws [4x18] (6) [2.0 Nm
Screw in the two screws [4x48] (7) [2.0 Nm
01.04.2019
±0.3 Nm
].
±0.3 Nm
].
±0.3 Nm
].
±0.3 Nm
].
Page 55 of 75