Metal Core Drilling
Fitting
9.3.5 Positioning the motor housing
Steps that must be completed:
-
Fitting the gearbox parts
-
Positioning the shaft
-
Fitting the armature
-
Fitting the intermediate gear box
Tool(s):
-
Socket head wrench, 5 mm
1
2
C-SC_CSSM
1.
2.
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Position the motor housing (1).
Screw in the four screws (2) [8.0 Nm
01.04.2019
±0.3 Nm
].
Page 67 of 75