Metal Core Drilling
Removal
8.3.2 Removing the shaft
Steps that must be completed:
-
Removing the connecting cable
-
Removing the drill motor
-
Removing the motor housing
-
Removing the gearbox parts
Tool(s):
-
Circlip pliers
-
Arbor press
1
2
2
C-SC_CSSM
1.
2.
3.
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Remove the feather key (1).
Remove the circlip (2).
Press out the shaft (3).
01.04.2019
Page 25 of 75