Positioning The Shaft - Fein KBE 35 (A) Repair Instructions

Metal Core Drilling
Fitting

9.2.2 Positioning the shaft

Steps that must be completed:
- Fitting the gearbox parts
Tool(s):
- Sleeve
11 mm inner diameter; 25 mm outer diameter
- Circlip pliers
1
2
C-SC_CSSM
1.
2.
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Press in the shaft (1).
Position the circlip (2).
01.04.2019 Page 57 of 75