Removing The Spider - Fein KBE 35 (A) Repair Instructions

Metal Core Drilling
Removal

8.4.10 Removing the spider

Steps that must be completed:
- Removing the electronics
- Removing the drill motor
- Removing the guide
Tool(s):
- Circlip pliers
- Inner bearing puller, 18–22 mm
- Slide hammer
3
C-SC_CSSM
1.
1
2.
2
3.
4.
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Remove the circlip (1).
Remove the spider (2).
Remove bush (3).
Repeat step 3 on the opposite side of the machine.
01.04.2019 Page 40 of 75