Metal Core Drilling
Fitting
9.1.7 Positioning the magnetic foot
Steps that must be completed:
-
Fitting the magnetic foot
Tool(s):
-
Socket head wrench, 5 mm
-
Torx T20
2
1
Photo shows similar product
3
C-SC_CSSM
1.
2.
3.
4.
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Position the magnetic foot (1).
Screw in the four screws (2) [8.0 Nm
Position the connecting cable.
Screw in the screw (3) [1.5 Nm
01.04.2019
±0.5 Nm
].
±0.2 Nm
].
Page 50 of 75