Positioning The Guide - Fein KBE 35 (A) Repair Instructions

Metal Core Drilling
Fitting

9.1.3 Positioning the guide

Steps that must be completed:
- Fitting the spider
- Positioning the spider
Tool(s):
- PH2 cross-head screwdriver
- Slotted screwdriver
- Socket head wrench, 2.5 mm; 3 mm; 4 mm
C-SC_CSSM
1.
1
2.
2
3.
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Place the pressure piece (1) in the correct position.
Screw in the twelve screws (2).
Remove the two guide strips.
01.04.2019 Page 44 of 75