Metal Core Drilling
Fitting
9.3.4 Positioning the intermediate gear box
Steps that must be completed:
-
Fitting the armature
-
Fitting the intermediate gear box
Tool(s):
-
Torx T20
1
2
C-SC_CSSM
1.
2.
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Position the motor housing (1).
I
NFORMATION
Use new sealing rings for each new fitting.
Screw in the four screws with the sealing ring (2)
±0.1 Nm
[1.8 Nm
].
01.04.2019
Page 66 of 75