Positioning The Intermediate Gearbox - Fein BOZ 32-4M Repair Instructions

Rotary Drills
Fitting

9.2.3 Positioning the intermediate gearbox

Steps that must be completed:
- Fitting the clutch and shafts
- Fitting the switch pushbutton
- Fitting the gearbox parts
- Fitting the armature
- Fitting the intermediate gearbox
Tools:
- Plastic hammer
1
C-SC_CSSM
2
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
1. Fit the gearbox housing (1) with the intermediate gearbox
(2).
01.01.2019 Page 36 of 47