Extension Cable - Fein BOP6 Series Instruction Manual

OBJ_BUCH-0000000221-001.book Page 7 Tuesday, July 21, 2015 8:42 AM

Extension cable.

If the use of an extension cord
WARNING
is required, its length and con-
ductor cross-section must be adequate for the
application in order to prevent a voltage drop
in the extension cord, power loss and over-
heating of the power tool. Otherwise, the
extension cable and power tool are prone to
electrical danger, and the working efficiency is
decreased.
Intended use of the power tool:
hand-held drill for drilling in metal, wood,
plastic, ceramics, and for tapping in weather-
protected environments using the application
tools and accessories recommended by FEIN.
Operation of the power tool off power generators.
Operating the power tool off
WARNING
power generators whose no-
load speed exceeds the voltage value on the
type plate of the power tool is prohibited.
Recommended dimensions of extension cords
at an operating voltage of 120 V – single-
phase a. c., with only BOP6 (**), BOP10 (**),
BOP10-2 (**), BOP13-2 (**) connected:
Max. cable length, ft Max. cable length, m
≤ 100 100 200
–200 –300
Min. conductor size Min. conductorcross-
A.W.G. section, mm
16 16 14
en
7
≤ 30 30 60
– 60 –100
2
1.5 1.5 2.5