Positioning The Carbon Brushes - Fein KBE 35 (A) Repair Instructions

Metal Core Drilling
Fitting

9.3.6 Positioning the carbon brushes

Steps that must be completed:
- Fitting the gearbox parts
- Positioning the shaft
- Fitting the motor housing
- Fitting the armature
- Fitting the intermediate gear box
- Positioning the intermediate gear box
- Positioning the motor housing
Tool(s):
- Long-nosed pliers
- Assembly aid
1
3
4
C-SC_CSSM
1.
2
2.
3.
4.
5.
6.
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Position the carbon brush holder (1).
Connect the cable (2) as shown in the connection diagram.
Position the carbon brush (2).
Connect the carbon brush (2) as shown in the connection
diagram.
Position the spring (4).
Repeat steps 1 to 5 on the opposite side of the machine.
01.04.2019 Page 68 of 75