Metal Core Drilling
Removal
8.2.8 Removing the motor housing
Steps that must be completed:
-
Removing the connecting cable
-
Removing the drill motor
-
Removing the carbon brushes
-
Removing the drill motor
-
Removing the intermediate gear box
Tool(s):
-
Slotted screwdriver
-
Plastic hammer
1
2
3
C-SC_CSSM
1.
2.
3.
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Remove the air guide ring (1).
Remove the cover (2).
Remove the stator (3).
01.04.2019
Page 23 of 75