Siemens SINAMICS S150 NEMA Operating Instructions Manual page 560

Functions, monitoring and protective functions
9.3 Drive functions
Function diagrams
FP 3040
FP 7033
Parameters
• p3880
• p3881
• p3882
• p3883
• p3886
• r3887[0...1]
• p3888
• r3889.0...10
9.3.24 Web server
9.3.24.1 Description
General information
The integrated Web server provides information about the drive unit via its Web pages.
Access is via an Internet browser. The information on the Web pages is shown in English.
For information about message texts, drive object statuses, and parameter names, there is a
language selection that enables the display to be switched to the languages that are stored
on the memory card.
The most important functions of the Web server are described below. However, the "Files"
and "User´s Area" display areas of the Web server are described in detail in a separate
document (see "User-defined Web pages"). For this reason, these display areas are not
included in this description.
Activation/configuration
The Web server is activated in the factory setting.
The Web server is configured using parameter p8986 (Web server configuration).
558
Setpoint channel - Direction limitation and direction reversal
Technology functions - Emergency operation (ESM, Essential Service
Mode
BI: ESM activation signal source
ESM setpoint source
ESM setpoint source alternative
BI: ESM direction of rotation signal source
CI: ESM setpoint TB30/TM31 analog input
ESM number of activations/faults
ESM reset number of activations/faults
CO/BO: ESM status word
Converter cabinet units
Operating Instructions, 11/2017, A5E36652151A