Table of Contents
Advertisement
Operation
6.3 Basic information about the drive system
Note
Using STARTER
The STARTER configuration and commissioning tool is recommended when using BICO
technology.
Binectors, BI: Binector Input, BO: Binector output
A binector is a unitless digital (binary) signal that can assume a value of 0 or 1.
Binectors are subdivided into binector inputs (signal sink) and binector outputs (signal
source).
Table 6- 3
Abbreviation and symbol
Connectors, CI: Connector Input, CO: Connector output
A connector is a digital signal, for example, in 32–bit format. It can be used to emulate words
(16 bits), double words (32 bits), or analog signals. Connectors are subdivided into
connector inputs (signal sink) and connector outputs (signal source).
The options for interconnecting connectors are restricted to ensure that performance is not
adversely affected.
Table 6- 4
Abbreviation and symbol
272
Binectors
Name
Binector input
Binector input
(signal sink)
Binector output
Binector output
(signal source)
Connectors
Name
Connector input
Connector input
(signal sink)
Connector output
Connector output
(signal source)
Description
Can be interconnected with a binector output as
source.
The number of the binector output must be
entered as a parameter value.
Can be used as a source for a binector input.
Description
Can be interconnected with a connector output as
source.
The number of the connector output must be
entered as a parameter value.
Can be used as a source for a connector input.
Operating Instructions, 11/2017, A5E36652151A
Converter cabinet units
Advertisement
Table of Contents
