Siemens SINAMICS S150 NEMA Operating Instructions Manual page 146

Electrical installation
4.9 Additional connections
Additional information about communication via CAN bus
Note
Additional information
Detailed, comprehensive instructions and information about the CANopen interface can be
found in the accompanying function manual. This manual is included under additional
documentation on the accompanying customer DVD.
4.9.16 PROFINET Communication Board CBE20 (option G33)
Description
Figure 4-32
The CBE20 interface module is used for communication via PROFINET / SINAMICS Link /
Ethernet/IP.
The module is installed in the option slot of the Control Unit at the factory.
There are 4 Ethernet interfaces available on the module. Diagnosis of the function mode and
communication are possible via LEDs.
144
CBE20 Ethernet Communication Board
Converter cabinet units
Operating Instructions, 11/2017, A5E36652151A