Table of Contents
Advertisement
Configuring the drive unit properties
Figure 5-17
⇒ Under Standard:, choose the appropriate standard for your motor,
whereby the following is defined:
● IEC motor (50 Hz, SI unit): Line frequency 50 Hz, motor data in kW
● NEMA motor (60 Hz, US unit): Line frequency 60 Hz, motor data in hp
⇒ Under Connection voltage: the DC link voltage of the cabinet unit is specified (this should
not be changed).
⇒ Click Next >
The connected motor can be selected and/or entered in different ways:
● by selecting a standard motor from a list
● by entering the motor data.
Converter cabinet units
Operating Instructions, 11/2017, A5E36652151A
Configuring the drive unit properties
5.3 Procedure for commissioning with STARTER
Commissioning
213
Advertisement
Table of Contents
