Table of Contents
Advertisement
6.6
Control via the operator panel
6.6.1
Operator panel (AOP30) overview and menu structure
Description
The operator panel can be used for the following activities:
● Parameterization (commissioning)
● Monitoring status variables
● Controlling the drive
● Diagnosing faults and alarms
All functions can be accessed via a menu.
Your starting point is the main menu, which you can always access using the yellow MENU
key:
Note
AOP reset
To stop the AOP from responding, press the key pushbutton and the OFF key at the same
time (and hold for longer than two seconds); the AOP reset will initiate as soon as you
release the OFF key.
Converter cabinet units
Operating Instructions, 11/2017, A5E36652151A
6.6 Control via the operator panel
Dialog screen for the main menu:
It can be accessed at any time with the
"MENU" key.
Press "F2" or "F3" to navigate through the
menu options in the main menu.
Operation
287
Advertisement
Table of Contents
