IS5 COMMUNICATIONS iES6 Series User Manual page 49

CLI Command Modes (Levels)
Modes Access Method
User EXEC Begin a session with
your switch.
Privileged Enter the enable
EXEC command while in
user EXEC mode.
Global Enter the configure
configuration command while in
privileged EXEC
mode.
Interface Enter the interface
configuration command (with a
specific
interface)while in
global configuration
mode
iS5 Communications Inc.
Prompt Exit Method
switch> Enter logout or
quit.
switch# Enter disable
to exit.
switch(config)# To exit to
privileged
EXEC mode,
enter exit or
end
switch(config- To exit to
if)# global
configuration
mode,
Enter exit.
To exit
privileged
EXEC mode or
end.
iES6 Series User's Manual
About This Model
The user command
available at the level of
user is the subset of
those available at the
privileged level.
Use this mode to:
• Enter menu mode.
• Display system
information.
The privileged command
is advance mode
Privileged this mode to:
• Display advance
function status
• save configures
Use this mode to
configure parameters
that apply to your Switch
as a whole.
Use this mode to
configure parameters for
the switch and Ethernet
ports.
50