Sntp (Time Setting) - IS5 COMMUNICATIONS iES6 Series User Manual

SNTP (Time Setting)

5.1.4.4
SNTP
The SNTP (Simple Network Time Protocol) settings allow you to synchronize switch clocks over
the Internet.
The following table describes the labels for the SNTP screen.
Label
SNTP Client
Daylight Saving Time
UTC Time zone
SNTP Sever IP Address
Daylight Saving Period
Daylight Saving Offset
Switch Timer
Apply
Local Time Zone
November Time Zone
Oscar Time Zone
ADT - Atlantic Daylight
iS5 Communications Inc.
Figure 18 - SNTP Configuration Interface
Description
Enables or disables the SNTP function. Switch gets the time from the SNTP
server.
Enables or disables the daylight saving time function. When daylight saving
time is enabled, you will need to configure the daylight saving time period.
Sets the switch location time zone. The following table lists the different
location time zones for your reference.
Sets the SNTP server IP address.
Sets up the Daylight Saving beginning time and Daylight Saving ending time.
Both times will be different each year.
Sets up the offset time.
Displays the switch current time.
Click "Apply" to activate the configurations.
Conversion from UTC
- 1 hour
-2 hours
-3 hours
iES6 Series User's Manual
Time at 12:00 UTC
11 am
10 am
9 am
25