System Warning - Event Selection - IS5 COMMUNICATIONS iES6 Series User Manual

5.1.10.4 System Warning – Event Selection
SYSLOG and SMTP are the two warning methods supported by the system. Check the corresponding
box to enable the system event warning method required. Please note that the check box cannot be
checked while SYSLOG or SMTP is disabled.
Figure 41 - System Warning – Event Selection Interface
The following table describes the labels for the System Warning screen.
Label
System Event
System Cold Start
Power Status
SNMP Authentication
Failure
iRing Topology Change
Port Event
SYSLOG / SMTP event
Apply
iS5 Communications Inc.
Description
Alert when the system restarts.
Alert when there is a power up or down.
Alert when there is a SNMP authentication failure.
Alert when the iRing topology changes.
Disable
Link Up
Link Down
Link Up & Link Down
Click "Apply" to activate the configurations.
iES6 Series User's Manual
44