Commands Set List - Tftp Command Set; Commands Set List - Syslog, Smtp, Event Command Set - IS5 COMMUNICATIONS iES6 Series User Manual

iES6 Series Commands
no snmp snmpv3-user
[User Name]
password
[Authentication Password]
[Privacy Password]
no snmp trap server
[Host-address]
6.6 Commands Set List — TFTP command set
iES6 Series Commands
TFTP [IP address] backup
[File name]
TFTP [IP address] restore
[File name]
TFTP [IP address] upgrade
[File name]
6.7 Commands Set List — SYSLOG, SMTP, EVENT command set
iES6 Series Commands
syslog ip
[IP address]
syslog mode
[client|server|both]
show syslog
no syslog
smtp enable
smtp serverip
iS5 Communications Inc.
Level Description
G Remove specified user of
SNMPv3 agent. Privacy
password could be empty.
G Remove the SNMP server
host.
Level Description
G Save configuration to TFTP
and need to specify the IP
of TFTP server and the file
name of image.
G Get configuration from
TFTP server and need to
specify the IP of TFTP
server and the file name of
image.
G Upgrade firmware by TFTP
and need to specify the IP
of TFTP server and the file
name of image.
Level Description
G
Set System log server IP
address.
G Specified the log mode
P Show system log client &
server information
G Disable system log
function
G Enable SMTP function
G Configure SMTP server IP switch(config)#smtp serverip 192.168.1.5
iES6 Series User's Manual
Example
switch(config)# no snmp snmpv3-user
test01 password AuthPW PrivPW
switch(config)#no snmp trap server
192.168.10.50
Defaults
Example
switch(config)# tftp 192.168.10.66
backup file.cfg
switch(config)# tftp 192.168.10.66
restore file.cfg
switch(config)# tftp 192.168.10.66
upgrade firmware.bin
Example
switch(config)# syslog ip 192.168.1.100
switch(config)# syslog mode both
switch#show syslog
switch(config)#no syslog
switch(config)#smtp enable
56