System Warning - Fault Relay Alarm; Save Configuration - IS5 COMMUNICATIONS iES6 Series User Manual

5.1.10.5 System Warning – Fault Relay Alarm
When any selected fault event is happened, the Fault LED in switch panel will light up and the electric
relay will signal at the same time.

5.1.11 Save Configuration

If any configuration has been changed, "Save Configuration" should be clicked to save the current
configuration data to the permanent flash memory. If not saved, the current configuration will be lost
when the switch is powered off or there is a system reset.
The following table describes the labels for the Save Configuration screen.
Label
Save
iS5 Communications Inc.
Figure 42 - Fault Alarm Interface
Figure 43 - System Configuration Interface
Description
Save all configurations.
iES6 Series User's Manual
45