Probe Connection To Logiq V2/Logiq V1; Probe Connector Locking Lever - GE LOGIQ V2 User Manual

Hide thumbs Also See for LOGIQ V2:

Table of Contents

Connecting the Probe (continued)

LOGIQ V2/LOGIQ V1

Direction 5610736-100 Rev. 9

3. Align the connector with the probe port and carefully push

into place with the cable facing the front of the system.

Figure 1-35. Probe connection to LOGIQ V2/LOGIQ V1

4. Flip the connector locking lever up.

Figure 1-36. Probe connector locking lever

5. Carefully position the probe cord so it is free to move and is

not resting on the floor.

6. When the probe is connected, it is automatically activated.

Make sure that the probe and application names displayed on

the screen correspond to the actual probe and application