Peripheral Connection (continued)
Dicom Setting
1/6
2/6
3/6
LOGIQ V2/LOGIQ V1
Direction 5610736-100 Rev. 9
–
User Guide
Onboard Help
In the lower left hand corner of the
monitor there is an icon for "Network
Connection". This icon will display the
current connection status. There is an
active connection.
Press Utility on control panel, then
select Connectivity tab. Next select
the Device tab. Click Add to add a
server name and IP address. For
example, we added the device name
"wardDicom" and input 3.35.157.99.
Click the Service tab under
connectivity. Using the Destination
Device pull down menu select the
"wardDicom" that was just created.
Now, "wardDicom" can be assigned a
task using the pull-down menu. For
example: Dicom Worklist.
6-33