GE LOGIQ V2 User Manual page 26

Getting Started
Battery (continued)
WARNING
WARNING
CAUTION
1-14
• The battery has a safety device. Do not disassemble or
alter the battery.
• Do not short-circuit the battery by directly connecting the
negative terminals with metal objects.
• Do not heat the battery or discard it in a fire.
• Do not charge the battery near a heat source, such as a
fire or heater.
• Do not leave the battery in direct sunlight.
• Do not pierce the battery with a sharp object, hit it, or step
on it.
• Do not use a damaged battery.
• Do not solder a battery.
• Do not connect the battery to an electrical power outlet.
If the LOGIQ V2/LOGIQ V1 is not being used on a monthly
basis, the battery needs to be removed during the lengthy
non-use period.
To avoid the battery bursting, igniting, or fumes from the battery
causing equipment damage, observe the following precautions:
• Do not immerse the battery in water or allow it to get wet.
• Do not put the battery into a microwave oven or
pressurized container.
• If the battery leaks or emits an odor, remove it from all
possible flammable sources.
• If the battery emits an odor or heat, is deformed or
discolored, or in a way appears abnormal during use,
recharging or storage, immediately remove it and stop
using it. If you have any questions about the battery,
consult GE or your local representative.
LOGIQ V2/LOGIQ V1
Direction 5610736-100 Rev. 9
–
User Guide