Next Clipboard Image; Clipboard Slide Show; Save As Menu; Number Of Images In Exam - GE LOGIQ V2 User Manual

Next Clipboard Image

Clipboard Slide Show

Save As menu

Number of Images in Exam

LOGIQ V2/LOGIQ V1
Direction 5610736-100 Rev. 9
Press the left arrow to move to the previous image; press the
right arrow to move to the next image.
The Clipboard Slide Show plays all images on the clipboard and
wraps around the ends. To activate, press and hold [Ctrl] +
[Previous Arrow] or [Ctrl] + [Next Arrow].
• Each image recalls for three seconds, or the length of the
loop, whichever is longer.
• You can manually skip to a new image during the slide show
by recalling it, as usual.
• To end the slide show manually, press [Ctrl] + [Previous]/
[Next] again.
• Slide Show ends when you go to live scanning, or if the
clipboard is not shown when it's time for the next image to
load.
Activate Save As feature.
The number of images in an exam is tracked on the bottom of
these Monitor Display Controls.
–
User Guide
Overview
1-39