Foreign Language and Keyboard Setup (For R1.0.x) (continued)
NOTE:
NOTE:
NOTE:
Foreign Language and Keyboard Setup (For R1.1.x)
NOTE:
LOGIQ V2/LOGIQ V1
Direction 5610736-100 Rev. 9
9. After the system restarts, the system appears in the
selected language.
Press Ctrl+Shift to change the input method, press Alt+Shift to
change the input language.
To have the settings take effect, you MUST turn off the system
and turn it back on.
Service password does not work for Greek and Russian
language settings. Change the setting to English.
You must apply the changes on each setup page before moving
to the next page.
1. In Utility -> System -> General, select Regional Options.
2. Under Formats select desired language.
–
User Guide
Figure 3-9. Region Option
Presets
3-7