Measurement And Annotation - GE LOGIQ V2 User Manual

Getting Started

Measurement and Annotation

1-36
This group of controls performs various functions related to
making measurements, annotating and adjusting the image
information.
• The Comment key enables the image text editor and
displays the annotation library.
• The Clear key is generally used to erase functions, such as
annotations/comments, body patterns and measurements.
Pressing the Clear key again exits the selected function.
• Press the Body Pattern control, it enables the Body Pattern
and displays the default pattern on the screen. When body
patterns are active, the knob rotates the probe position
indicator.
• Press Set to fix the measurement after the ellipse
adjustment is complete. The measurement is then displayed
in the measurement result window.
• The Measure key is used in all types of basic
measurements. When the Measure key is pressed, the
measurement Primary Menu is displayed.
• The Set key is used for various functions, but is generally
used to fix or finish an operation (e.g. to fix a measurement
caliper).
• The Trackball is used with almost every key function in this
group. Trackball control depends on the last key function
pressed.
LOGIQ V2/LOGIQ V1
Direction 5610736-100 Rev. 9
–
User Guide