GE LOGIQ V2 User Manual page 116

Performing an Exam
Using Scan Coach (For R1.0.x) (continued)
Figure 2-7. Scan Coach Reference, Probe position and Schema Images
2-24
3. Select or press the button
reference image screen for the current active step.
4. Select
probe position and schema image along with the reference
image. It displays reference image, probe position and
schema to guide the user to acquire the right scan plane.
5. Complete the scan and make the measurements if
necessary, press Store key to store the image and go to
next step.
or press the button
LOGIQ V2/LOGIQ V1
Direction 5610736-100 Rev. 9
to activate the
to activate the
–
User Guide