GE LOGIQ V2 User Manual page 168

After the Exam is Over
Foreign Language and Keyboard Setup (For R1.0.x) (continued)
3-6
6. In the Regional and Language Options screen, select OK,
select No in the following pop-up message.
Figure 3-6. Restart Message
7. In Utility--> System--> General -> Location -> Language, set
the Language as desired.
8. Press Save, select OK in the pop-up message.
Figure 3-8. Restart Message
Figure 3-7. Location
LOGIQ V2/LOGIQ V1
Direction 5610736-100 Rev. 9
–
User Guide