System Measurements And Accuracies - GE LOGIQ V2 User Manual

Basic Measurements (continued)
Table 2-7:
Measurement
Depth mm
Angle degree
Distance:
Axial mm
Lateral mm
Circumference:
Trace mm
Ellipse mm
Area:
Trace
mm
Ellipse
mm
Time s
Slope mm/s
Doppler SV mm
Position
Doppler Velocity cm/s
Doppler Angle cm/s
Correction
LOGIQ V2/LOGIQ V1
Direction 5610736-100 Rev. 9

System Measurements and Accuracies

Units Useful Range
Full Screen
Full Screen
Full Screen
Full Screen
Full Screen
Full Screen
Full Screen
2
Full Screen
2
Timeline Display
Timeline Display
Full Screen
Form 0 to 100 cm/s
From 100 to 130 cm/s
From 0-80°
–
User Guide
Measurement and Analysis
Accuracy Limitations or Conditions
<=10% NA
<=5% NA
<5% Linear Probes, Convex
Probes, Sector Probes
<5% Linear Probes, Convex
Probes, Sector Probes
<=10% Linear Probes, Convex
Probes, Sector Probes
<=5% Linear Probes, Convex
Probes, Sector Probes
<=5% Linear Probes, Convex
Probes, Sector Probes
<=5% Linear Probes, Convex
Probes, Sector Probes
<5% M mode, AM mode, CM mode,
PWD mode, CWD mode
<=10% M mode, AM mode, CM mode,
<=2 mm PWD mode
<15% PWD mode, CWD mode
<10%
<=5% PWD mode
2-69