GE LOGIQ V2 User Manual page 134

Performing an Exam
Using SonoBiometry (continued)
NOTE:
NOTE:
2-42
If a particular image is not supported for SonoBiometry
measurement, a warning message appears: "Not able to
proceed on the image supplied".
If a particular scanned image does not have valid fetus data, a
warning message appears: "No valid 'auto measurement' found
- proceed with a manual measurement!".
You can not use SonoBiometry (AFB) measurements on the
following images:
• Images displayed in Dual/Quad view. In these views, an
SonoBiometry (AFB) measurement will change to manual
measurement automatically.
• Zoomed image.
• Rotated image.
LOGIQ V2/LOGIQ V1
Direction 5610736-100 Rev. 9
–
User Guide