When Moving The System; Transporting The System - GE LOGIQ V2 User Manual

Hide thumbs Also See for LOGIQ V2:

Table of Contents

Getting Started

When moving the system

Always use the handle to move the system.

The system weighs approximately 6 kg (13.23 lbs). To avoid

possible injury and equipment damage:

Do not let the system strike walls or door frame.

Use extra care when transporting the system using vehicles. In

addition to the instructions used when moving the system (see

'Before moving the system' on page 1-43 for more information),

also perform the following:

1. Before transporting, place the system in its special storage

2. Ensure that the system is firmly secured while inside the

LOGIQ V2/LOGIQ V1

Direction 5610736-100 Rev. 9