Connecting The Computer - RADVision SCOPIA XT1000 Series User Manual

Procedure
Step 1
Move the camera as described in
to the desired position.
Step 2
Press the Preset key
position.
A message confirming the stored position appears on the display.

Connecting the Computer

You need a computer to share a presentation during a call. This procedure describes how to
connect computers that are equipped with a DVI out or VGA out connector.
The Codec Unit supports these DVI input formats: 1920 x 1200 (WUXGA), 1920 x 1080, 1600 x 1200
(UXGA), 1440 x 900 (WSXGA), 1280 x 1024 (SXGA), 1280 x 720, 1280 x 768 (WXGA), 1024 x 768
(XGA), 800 x 600 (SVGA), 640 x 480 (VGA).
RADVISION | User Guide for SCOPIA XT1000 Series Version 2.5
Positioning the Local and Remote Cameras page 46
on the Remote Control Unit, and enter a number for the current
Preparing for a Video Call or Videoconference | 26
and adjust