Restoring Default User Settings - RADVision SCOPIA XT1000 Series User Manual

If you manage your SCOPIA XT1000 remotely using web interface, you can pair a Remote Control
Unit with your Codec Unit remotely by accessing the web interface and navigating to Settings >
User settings > User Preferences.
Procedure
Step 1
On the Main Menu page, scroll to Settings.
Step 2
Press
Step 3
Using the arrow keys, scroll to the Remote control code field and type a number. You can enter
a number between 1 and 99.
Step 4
Press
Step 5
Simultaneously press
Step 6
Using the keypad, type the number you just entered in the Remote control code field.
Step 7
Press

Restoring Default User Settings

You can use the User settings page to change the default settings of the system and adapt them
to your work requirements. You can restore the default user settings at any time.
Restoring default settings causes a system restart.
RADVISION | User Guide for SCOPIA XT1000 Series Version 2.5
User settings. The General page appears on the display.
Figure 3-9 Setting the Remote Control Unit Code
to save.
and . The
Finish.
button becomes red.
Getting Started | 16