Positioning The Local And Remote Cameras; Recalling A Camera Position - RADVision SCOPIA XT1000 Series User Manual

Positioning the Local and Remote Cameras

You can control the local video camera zoom and panning functions and also those of the remote
camera. To select between the local and remote camera, press
You can control the remote camera when the connection with the remote terminal is established
and the remote camera is configured to be remotely managed.
You can use the arrow keys to move the camera when the graphic menu is hidden.When the menu
is visible, you can move the camera by using menu commands: scroll to Cameras using the arrow
keys, and select
or out as desired. You can always zoom in or out without selecting Move camera. Select
moving camera. To switch to another camera, press
You can control the cameras remotely using web interface by accessing the web interface and
navigating to Options > Cameras control.
Procedure
Step 1
While in a call, press
Step 2
Use the arrow keys to move the selected camera to the preferred position.
Step 3
Press
Step 4
To switch to another camera, press
Note:
Note:

Recalling a Camera Position

This feature helps you move the camera to your preferred position and facilitates setting up the
videoconference. Just recall the preferred camera position you stored previously in the system,
and the camera moves to the memorized position.
For information about storing a camera position, see
Procedure
Step 1
Press preset
Step 2
Enter the number corresponding to the required preset position.
RADVISION | User Guide for SCOPIA XT1000 Series Version 2.5
Move camera. Move the selected camera to the preferred position. Zoom in
to hide the graphics in the Main Menu page.
+ or - to zoom in or out.
You can control the second camera either with its stand-alone remote control or the
Remote Control Unit. For this option connect a crossed control cable between the first
and second camera. Ask your system administrator for the availability of such a cable.
If you connect a camera to the DVI-I input, the system manages it as PC content. In this
case you cannot control the camera from the XT1000 Remote Control Unit, unless the
camera is connected using VISCA Cross cable. For more information, refer to your system
administrator.
on the Remote Control Unit.
.
. Press or to bring back the graphics.
"Storing a Camera Position" on page
or .
25.
Managing Calls and Videoconferences | 46
Stop