Setting The Monitor Resolution; Calibrating The Monitor Color Levels - RADVision SCOPIA XT1000 Series User Manual

Step 4
Select Automatic from the Local presentation mode list.
Step 5
Set Show warnings to Yes if you want the system to display the prompt when there is an incoming
call.
Step 6
Set the presentation ratio setting in the Keep presentation ratio list:
•
•

Setting the Monitor Resolution

The rear panel of the Codec Unit features 2 HD inputs for connecting a main and auxiliary screen.
For cabling, see the cabling diagram in the Quick Setup Guide.
Your system administrator must configure the system for correct video resolution.
When you are not in a call, you can set the refresh frequency of the monitor display:

Calibrating the Monitor Color Levels

Monitors might need setup of color levels, brightness, and contrast to suit the requirements of the
call participants and the environment of the conference room.
You can generate a graphic synthetic image in the monitor and use the image colors as a reference
for fine tuning the monitor settings.
Use the monitor's remote control unit to calibrate the settings. Consult the monitor's user guide
or the manufacturer's web site for calibration information.
Procedure
Step 1
From the Main Menu page scroll to Settings and press
Unit.
Step 2
Scroll to Diagnostics.
Step 3
Select Monitor. The display shows the Tests page.
Step 4
Navigate to the Generate test image
Step 5
Press
Step 6
Calibrate the monitor using the image as a reference for color levels. After performing
calibration, you can return the system menus to the monitor by pressing
RADVISION | User Guide for SCOPIA XT1000 Series Version 2.5
Yes—to keep the original presentation ratio even if the resolution is changed.
No—to display the presentation on the whole monitor.
•
Set to 50 Hz by pressing
•
Set to 60 Hz by pressing
on the Remote Control Unit to remove the system menus from the display.
then 5.
then 6.
button and press
User settings on the Remote Control
to generate the image.
.
Tailoring Your User Experience | 23